How To Make Windows Xp Usb Boot Disk

This guide explains how to create a Windows bootable USB bulldoze for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows ten, andWindows 11.

Creating a bootable USB drive will permit y'all to install Windows from the USB drive directly.

To be able to install Windows from a USB, you need take i of the post-obit:

• the ISO image of the Windows version
• or the original installation disc of the Windows version

If you don't take either, you lot can instead download an EasyRE ISO epitome that tin be made into a bootable USB or CD to restore your PC.

Contents

• one Prerequisites
  • 1.ane USB Drive
  • 1.2 BIOS/UEFI configuration
  • 1.iii ISO image
• 2 Create a Windows XP bootable USB
  • 2.1 Using Piece of cake USB Creator 2.0
  • ii.ii If you take the installation disc (CD)
• iii Create a Windows Vista bootable USB
  • 3.one If you take the ISO paradigm
    • three.ane.1 Using Piece of cake USB Creator two.0
    • 3.1.2 Using Windows 7 USB/DVD Download Tool
  • iii.2 If you have the installation disc (DVD)
• iv Create a Windows seven bootable USB
  • four.1 If you take the ISO image
    • 4.1.i Using Piece of cake USB Creator 2.0
    • iv.1.ii Using Windows 7 USB/DVD Download Tool
  • 4.2 If you have the installation disc (DVD)
• 5 Create a Windows viii / 8.1 bootable USB
  • v.1 If you have the ISO image
    • 5.one.one Using Easy USB Creator 2.0
    • 5.1.2 Using Windows 7 USB/DVD Download Tool
  • 5.2 If you have the installation disc (DVD)
• 6 Create a Windows ten bootable USB
  • 6.i If y'all have the ISO image
    • half-dozen.1.ane Using Piece of cake USB Creator 2.0
    • 6.1.2 Using Windows vii USB/DVD Download Tool
  • 6.2 If yous accept the installation disc (DVD)
• seven Troubleshooting
  • 7.i Setup cannot observe the End User Licensing Agreement (EULA)
  • 7.two Download Windows 7 USB/DVD Download Tool
  • 7.iii Bootable USB will non kick
• 8 More Data
  • viii.1 Support Links
  • viii.ii Applicative Systems

Prerequisites

Earlier y'all kickoff creating a bootable USB flash drive to install Windows (XP, Vista, vii, 8, 8.one, ten), you need to make certain that:

• The USB drive is empty and properly formatted
• The USB drive is bootable
• Your BIOS/UEFI is properly configured to boot from the USB wink drive start
• You take the ISO image of Windows XP, Vista, 7, viii or 8.1. If you accept the original Windows installation disc, you can use that instead of the ISO paradigm.
• Software needed to write the ISO paradigm to the USB drive or alternatives, such as Piece of cake USB Creator 2.0 by NeoSmart or the Windows seven USB/DVD Download Tool by Microsoft.

USB Drive

The USB bulldoze y'all desire to brand bootable should have at to the lowest degree 4 GB in available size.

BIOS/UEFI configuration

To make certain that your BIOS/UEFI is configured to boot from a USB drive, follow our Kicking from USB drive guide. You demand to make sure that:

If a Boot Device card doesn't appear on your screen where the USB bulldoze is plugged-in, bank check the BIOS/UEFI settings. A Kick Device menu tin can look like this, depending on your computer model and Windows version:

If you are using a new computer with UEFI/EFI, make certain that the Boot Legacy selection is enabled:

If y'all're using a computer with Fast Kick pick, make certain that Fast Kicking is disabled.

If your BIOS carte du jour doesn't listing a USB item in the BIOS settings, it may mean that it can't boot from a USB drive. You can try with the USB drive plugged-in and so boot into BIOS directly.

If the item doesn't announced, y'all need to use the original Windows installation CD or DVD to install Windows or admission the repair tools.

If you need to use the repair tools of an original Windows installation CD/DVD, you can also use Piece of cake Recovery Essentials (download link) and run Automated Repair to automatically find and set up boot errors.

Download Like shooting fish in a barrel Recovery Essentials

ISO image

If you don't have the ISO prototype to create the bootable USB drive, you can download an official image from Microsoft's website.

Yous need to accept the product (or license) cardinal.

Create a Windows XP bootable USB

You tin can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator tin chop-chop convert the ISO images into bootable USB drives, with but a single click:

Download Easy USB Creator ii.0

To burn down Windows XP to a USB bulldoze using Piece of cake USB Creator ii.0, simply follow these steps:

1. Download USB Creator 2.0
2. Install Piece of cake USB Creator 2.0
3. Scan the Windows XP ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Offset

Like shooting fish in a barrel USB Creator 2.0 supports both USB 2.0 and USB 3.0.

Information technology'due south compatible with Windows XP, Windows Vista, Windows 7, Windows eight, Windows 8.ane, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must take .Cyberspace Framework 2.0 or higher in society to utilize Easy USB Creator 2.0

If you have the installation disc (CD)

If you have the original Microsoft Windows XP Professional installation CD, yous tin use the CD to create a bootable USB using PE Architect.

It'due south important to have the post-obit before you lot start:

• The Windows Server 2003 SP1 annal. If non, download from Microsoft now: Microsoft Windows Server 2003 Service Pack 1 (32 bit)
• The PE Builder software (BartPE). If not, download BartPE
• The original CD of Windows XP Professional, non a Windows XP Dwelling CD.

  A Windows XP Dwelling house CD will not work.

To create the bootable drive with Windows XP, follow these steps:

1. Kicking into the arrangement
2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
3. Install the PE Architect to C:\. The final path should be C:\PEBuilder to make the next steps easier.

Inside the PEBuilder binder, create a new binder named SRSP1. This binder's path should be C:\PEBuilder\SRSP1.

• Download the Windows Server 2003 SP1 annal from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
• Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
• Open up Command Prompt. You can also open up it by typing cmd in the Run dialog box and pressing Enter afterwards.
• Type the cd command to become to the folder where the MS-WS-SP1.exe file exists:

  cd c:\downloads

  Don't type MS-WS-SP1.exe in the path higher up. Yous merely demand to go to the folder where the file exists.

  Replace c:\downloads with the letter of the drive and the directory where the MS-WP-SP1.exe file exists.

• Type MS-WS-SP1.exe -ten to begin the extraction procedure, press Enter
• Choose to extract the files to the same folder, e.g. c:\downloads:

  

  PEBuilder: Extract Files

• In Control Prompt, you now demand to become to the extract folder at the i386 sub-folder.To practice so, blazon the same cd command, if you're even so at the c:\downloads folder in Command Prompt and you lot haven't created a new binder for the extracted files:

  cd i386

  If you lot created a new folder for the extract files, say Excerpt, in c:\downloads, update the cd command to become to that folder:

  cd c:\downloads\Extract

  Then, type cd i386, printing Enter

• One time inside the i386 folder via Command Prompt, type:

  copy setupldr.bin c:\PEBuilder\SRSP1

  Supervene upon c:\PEBuilder\ with the path where the PE Builder software is installed, if this was changed in previous steps.

• While yet in Command Prompt, expand the ramdisk.sys file with this command:

  expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

  Supercede c:\PEBuilder\ with the path where the PE Builder software is installed, if this was inverse in previous steps.

• Go to My Computer
• Become to PEBuilder folder
• Go to SRSP1 folder
• Cheque that you have the 2 files listed in that location: setupldr.bin and ramdisk.sys

  

  PEBuilder: Check that you take the files copied

• Insert the Windows XP Professional CD in the disk tray
• Launch PE Builder
• Brand the following changes before yous click Build:

  

  BartPE: Configuration for Windows XP USB

  • At the Source field, type the letter of the drive for the Windows XP CD, east.m. due east:\
  • At the Output field, blazon BartPE
  • Go out the Custom field bare
  • Media output should be None
• Click Build
• When the build process is consummate, click Shut
• Become to Control Prompt and so go to the PEBuilder folder by typing the cd command:

  cd c:\PEBuilder

• Type this command (brand sure the USB flash drive is non removed) and press Enter:

  pe2usb -f d:

  Supplant d: with the alphabetic character of the drive where your USB flash drive is loaded.

• Type YES, when prompted to brainstorm the process. Press Enter after typing Yeah.
• Press any central to go out the pe2usb process, afterward the process is complete
• Safely remove the USB flash drive from the port
• Remove the Windows XP CD from the disk try
• Reboot the system to bank check if the USB flash drive is now bootable with Windows XP Professional person

If your estimator doesn't boot into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive guide to configure your BIOS bill of fare to boot from a USB device kickoff.

Create a Windows Vista bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can utilise Easy USB Creator two.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator tin can chop-chop convert the ISO images into bootable USB drives, with only a single click:

Download Easy USB Creator 2.0

To burn down Windows Vista to a USB bulldoze using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator 2.0
3. Browse the Windows Vista ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Showtime

Easy USB Creator 2.0 supports both USB ii.0 and USB 3.0.

It'southward uniform with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows x plus the Windows Server editions (2003, 2008, 2012). You lot must have .Internet Framework 2.0 or higher in society to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/viii.1.

While the proper name is "Windows 7", you tin can utilize the tool for Windows Vista systems too.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

You'll be using the diskpart utility, bachelor in Windows Vista, to make the USB drive bootable. You'll copy the files from the installation disc (DVD) to the USB bulldoze after the diskpart utility process is finished.

The instructions are:

1. Kicking your computer
2. Open Command Prompt and run it as Administrator.You can go at Showtime > All Programs Accessories > Command Prompt or type cmd in the search field.To run Command Prompt as Ambassador, right-click on the Command Prompt particular and select Run as Administrator.
3. When Command Prompt opens, type this control and printing Enter:

   cd c:\windows\system32

   Replace c:\ with the letter of the alphabet of the driver where your Windows Vista is installed: C:\, D:\ etc.

4. Insert the USB flash drive in the USB port
5. Type:

   diskpart

6. Press Enter
7. Blazon:

   list deejay

8. Press Enter
9. Subsequently y'all press Enter for the listing disk command, Command Prompt will listing the drives that are connected to your computer. Find the USB drive and its corresponding number.

   

   Control Prompt: list disk

10. And then, blazon this command:

    select disk X

    Where 10 is the number of the USB flash bulldoze listed past Command Prompt.

    The confirmation message should be:

    Deejay 1 is at present the selected deejay.

11. Press Enter
12. Blazon clean and printing Enter
13. Type create partition primary and printing Enter
14. Type select partition 1 and printing Enter
15. Type active and printing Enter
16. Type this command and press Enter afterwards:

    format fs=ntfs

    It may take a few minutes to format the entire USB flash drive, depending on its size. However, yous tin can utilise the quick parameter to format the bulldoze more than quickly:

    format fs=ntfs quick

17. Blazon assign, press Enter
18. Type leave, press Enter
19. Insert the Windows Vista DVD in the optical drive
20. Go to My Computer
21. Notation the letter of the alphabet of the drive where the Windows Vista DVD is loaded, e.g. D:\, East:\
22. Go dorsum to Command Prompt and check if the USB flash drive has been formatted
23. When the format process is complete, type this command and press Enter:

    d: cd boot

    Replace D: with the alphabetic character of the bulldoze where the Windows Vista DVD is loaded

24. Then blazon cd kick and press Enter
25. Type this control and press Enter:

    bootsect.exe /nt60 f:

    Where f: is the alphabetic character of the drive where your USB flash drive is loaded

26. Copy all files from the Windows Vista DVD on the USB flash drive.To open up the contents of the DVD (and non load the splash screen of the Windows Vista DVD), right-click on the drive and click Open up.

If you followed the to a higher place instructions correctly, the USB flash drive should now be bootable with Windows Vista.

Y'all tin cheque this past plugging the USB and rebooting the system. To make sure that your figurer boots from a USB drive starting time, and not from the difficult disk, go to BIOS/UEFI configuration.

Create a Windows vii bootable USB

Yous can create the bootable USB drive with Windows vii, if:

• you have the ISO prototype of Windows seven
• or you have the original installation DVD of Windows vii

If y'all take the ISO epitome

Using Easy USB Creator two.0

Easy USB Creator can rapidly convert the ISO images into bootable USB drives, with just a unmarried click:

Download Piece of cake USB Creator two.0

To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator 2.0
3. Browse the Windows vii ISO Paradigm to load at the ISO File field
4. Select the destination of your USB Bulldoze at the Destination Drive field
5. Start

Easy USB Creator 2.0 supports both USB two.0 and USB 3.0.

It'south compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows viii.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You lot must take .NET Framework ii.0 or college in order to use Easy USB Creator ii.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO epitome from the ISO image y'all purchased and downloaded from Microsoft.

Before you continue with these instructions, please make sure that:

• You have the Windows 7 USB/DVD Download Tool downloaded. If not, download Windows 7 USB/DVD Download Tool now.
• Y'all have the Windows 7 ISO Image ready

The instructions are:

1. Download Windows vii USB/DVD Download Tool from http://wudt.codeplex.com/ and launch information technology
2. At the Source File field, click Scan and find the Windows 7 ISO image on your computer and load information technology

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Side by side
4. Select USB Device
5. Select the USB wink drive from the drop downward menu
6. Click Begin copying
7. Go out the application, when the process is complete

If you lot have the installation disc (DVD)

You can employ a USB flash drive (see Prerequisites for more information) to install Windows 7 from.

To do so, yous need to make the USB flash drive bootable offset and then use the original Windows 7 installation disc (DVD) to re-create the contents of the DVD to the USB drive.

The diskpart utility, part of Windows seven, volition be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If yous have an installation disc):

1. Start the computer
2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
3. Enter the password for the Administrator account
4. At Control Prompt, type:

   cd c:\windows\system32

   Supercede c:\ with the alphabetic character of the driver where your Windows 7 is installed: C:\, D:\ etc.

5. Press Enter
6. Insert the USB drive that you desire to make bootable in an available port
7. Type diskpart and printing Enter
8. Type list disk and press Enter

   

   Command Prompt: list disk

9. Detect the USB drive and its corresponding number in the list provided by Command Prompt
10. Type this command and press Enter:

    select deejay 10

    Where X is the number of the USB bulldoze listed by Control Prompt in a higher place.

    The confirmation message should be:

    Disk 1 is now the selected disk.

11. Type make clean, press Enter
12. Type create partition primary, press Enter
13. Blazon select partition ane, press Enter
14. Type active, printing Enter
15. Type format fs=ntfs and press Enter.

Y'all can use the quick parameter to format the bulldoze more than quickly: format fs=ntfs quick

• Insert the Windows vii DVD and go to My Calculator. Annotation the letter of the drive where the DVD is loaded, east.chiliad. D:\, E:\
• Type assign, press Enter
• Type leave, press Enter
• Subsequently the format process is complete, blazon this control in Control Prompt and press Enter:

  d: cd boot

  Where d: with the letter of the alphabet of the drive where the Windows 7 DVD is loaded.

• Type cd kick, printing Enter
• Type this command and press Enter:

  bootsect.exe /nt60 f:

  Where f: is the alphabetic character of the drive where the USB wink bulldoze is loaded

• Open the contents of the Windows 7 DVD: right-click on the drive and click Open
• Copy all files from the DVD to the USB

Create a Windows viii / 8.1 bootable USB

Depending if y'all have the ISO image of Windows Vista or the original DVD, you tin can utilise Piece of cake USB Creator 2.0 to create the USB if y'all have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If y'all have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Download Piece of cake USB Creator 2.0

To burn Windows viii or viii.ane to a USB drive using Easy USB Creator 2.0, just follow these steps:

1. Download USB Creator 2.0
2. Install Piece of cake USB Creator ii.0
3. Browse the Windows 8 or Windows eight.1 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Start

Easy USB Creator ii.0 supports both USB 2.0 and USB 3.0.

Information technology'due south compatible with Windows XP, Windows Vista, Windows 7, Windows eight, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You lot must have .Net Framework ii.0 or higher in order to use Piece of cake USB Creator 2.0

Using Windows vii USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is bachelor to download and yous can employ it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the proper noun is "Windows seven", you tin employ this tool on a Windows eight or 8.1 organisation besides.

Earlier you continue with these instructions, please brand certain that:

• You have the Windows 7 USB/DVD Download Tool downloaded. If non, download the Windows 7 USB/DVD Download Tool now.
• You accept the Windows 8 or viii.1 ISO Image fix

The instructions are:

1. Launch the Windows seven USB/DVD Download Tool
2. At the Source File field, click Browse and find the Windows 8 or 8.i ISO image on your reckoner

   

   Windows vii USB/DVD Download Tool: Source File

3. Click Next
4. Insert the USB wink bulldoze in an available port on your computer. Make sure it'southward loaded in My Computer.
5. At Step 2, select USB Device to write the ISO image to the USB bulldoze. Y'all can click DVD to write the ISO epitome to a DVD instead.

   

   Windows vii USB/DVD Download Tool: Choose Media Type

6. At Step three, select the USB flash bulldoze from the driblet down carte du jour. If the drive isn't loaded still, you can click on the Refresh icon next to the drop down card.
7. Click Begin copying
8. When done, exit the Windows 7 USB/DVD Download Tool

   

   Windows 7 USB/DVD Download Tool: Done

If you accept the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows eight or Windows eight.ane yous can create a bootable USB drive.

To do so, follow the steps below:

1. Boot into Windows 8 or 8.one
2. Open Command Prompt as Administrator. To practice and so, press the and C fundamental to search for cmd. From the search results list, right-click on Control Prompt
   
3. Click Run as administrator
   
4. Enter the password, when prompted
5. When Command Prompt opens, type this command and press Enter:

   diskpart

6. Insert the USB wink drive in the port
7. Blazon listing disk, press Enter

   

   Command Prompt: list disk

8. Identify the number adjacent of the USB drive in the list provided past the list deejay command
9. Type select disk X, printing Enter. Replace 10 with the number of the USB drive listed from above steps.

   

   Command Prompt: select deejay

   The confirmation message should be:

   Deejay 1 is at present the selected disk.

10. Type clean, printing Enter
11. Type create partition primary, press Enter
12. Type select partition ane, printing Enter
13. Type active, press Enter
14. Type format fs=ntfs, press Enter. To take the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
15. Type assign, press Enter
16. Type exit, press Enter
17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB wink bulldoze

Create a Windows 10 bootable USB

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Download Easy USB Creator ii.0

To burn down Windows 10 to a USB drive using Like shooting fish in a barrel USB Creator two.0, simply follow these steps:

1. Download USB Creator ii.0
2. Install Easy USB Creator 2.0
3. Browse the Windows 10 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB iii.0.

It's uniform with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.one, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .Internet Framework 2.0 or higher in order to use Like shooting fish in a barrel USB Creator 2.0

Using Windows seven USB/DVD Download Tool

The Windows vii USB/DVD Download Tool is available to download and you tin use information technology to create a bootable ISO image from the ISO prototype you purchased and downloaded from Microsoft.

While the name is "Windows 7", you lot can use this tool on a Windows 10 system too.

Before yous continue with these instructions, delight make certain that:

• You take the Windows seven USB/DVD Download Tool downloaded. If non, download the Windows vii USB/DVD Download Tool now.
• You have the Windows 10 ISO Image prepare

The instructions are:

1. Launch the Windows 7 USB/DVD Download Tool
2. At the Source File field, click Browse and find the Windows 10 ISO image on your reckoner

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Side by side
4. Insert the USB wink drive in an available port on your computer. Make sure it'due south loaded in My Estimator.
5. At Stride ii, select USB Device to write the ISO image to the USB bulldoze. You tin click DVD to write the ISO image to a DVD instead.

   

   Windows 7 USB/DVD Download Tool: Choose Media Blazon

6. At Stride 3, select the USB flash bulldoze from the drop downwards menu. If the drive isn't loaded nonetheless, yous can click on the Refresh icon next to the driblet down bill of fare.
7. Click Begin copying
8. When done, exit the Windows seven USB/DVD Download Tool

   

   Windows 7 USB/DVD Download Tool: Washed

If you lot accept the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows x you can create a bootable USB drive.

To practice then, follow the steps beneath:

1. Boot into Windows 10
2. Open Control Prompt as Administrator. To do so, press the and C primal to search for cmd. From the search results listing, make sureCommand Prompt is the chosen result than use the "Run equally Administrator" choice on the side:
   
3. Enter the password, when prompted
4. When Command Prompt opens, type this command and press Enter:

   diskpart

5. Insert the USB wink drive in the port
6. Type listing disk, press Enter

   

   Command Prompt: list disk

7. Identify the number next of the USB drive in the list provided by the list disk command
8. Type select disk X, printing Enter. Replace X with the number of the USB drive listed from above steps.

   

   Command Prompt: select disk

   The confirmation message should be:

   Disk 1 is now the selected disk.

9. Type clean, press Enter
10. Type create partition primary, press Enter
11. Type select partition 1, press Enter
12. Blazon agile, press Enter
13. Type format fs=ntfs, press Enter. To have the USB drive formatted more rapidly, add together the quick parameter: format fs=ntfs quick
14. Type assign, press Enter
15. Type exit, press Enter
16. Copy the contents of the Windows 10 DVD to the USB wink drive

Troubleshooting

Setup cannot find the End User Licensing Agreement (EULA)

You may receive this fault when trying to write a Windows (XP, Vista, 7, viii, viii.1) ISO Epitome to a USB drive and make it bootable:

Setup cannot discover the End User Licensing Understanding (EULA) Setup cannot continue.  To Quit, Printing F3

If so, the ISO prototype might exist corrupted. In this case, you lot tin try:

• download a new ISO image from Microsoft
• use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO epitome are bachelor in this guide for all Windows versions)
• apply Easy Recovery Essentials if you're looking for accessing repair tools. Run EasyRE'southward Automated Repair feature to automatically scan and set various kicking errors. Other features are available.

Download Windows vii USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, get to http://wudt.codeplex.com/.

Bootable USB volition not kicking

To make sure that the USB drive will kicking when starting your figurer, make certain that:

• Your BIOS configuration allows USB drives to kicking beginning and then boot from difficult disk. Follow the steps from BIOS/UEFI configuration or the our Boot from USB drive guide.

If you created the bootable USB drive using the Windows vii USB/DVD Download Tool, new computers with UEFI might not boot from the USB every bit information technology's been formatted using NTFS and non FAT32.

To become around this, follow these steps:

1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, become to My Computer and copy all contents from the USB drive to a folder on your Desktop

   

   Windows 7 USB/DVD Download Tool: Done

2. Correct-click on the USB Drive in My Reckoner and format it as FAT32
3. Afterwards the format process is complete, copy all files from the folder you created on your Desktop dorsum to the USB drive

More Information

Support Links

• Easy Recovery Essentials for Windows – our repair and recovery disk.

  It's an easy-to-use and automated diagnostics disk. It'due south available for Windows 8, Windows vii and Windows Vista. It'south likewise available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
• Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows viii, Windows ten, Windows 11.

Applicable Systems

This Windows-related knowledgebase article applies to the post-obit operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows 8 (all editions)
• Windows 8.1 (all editions)
• Windows 10 (all editions)
• Windows 11 (all editions)
• Windows Server 2003 (all editions)
• Windows Server 2008 (all editions)
• Windows Server 2012 (all editions)

Propose an edit

Source: https://neosmart.net/wiki/bootable-windows-usb/

Posted by: battintanderies.blogspot.com

Share this post